You must finish the driver and hardware installation first, before proceeding to hardware configuration.
The serial console port and hardware configuration utility program need to work with the first serial port of the VSCOM USB PRO series Industrial I/O Adapters. You must find from the ¡°Device Manager¡± of Windows the first serial port number of your VSCOM USB PRO Industrial I/O Adapter. Open this serial port with any terminal program (Hyperterminal, or other terminal emulator program), select 38400 bps, 8 Bit, No Parity, 1 stop bit, flow control : none for serial console port.
(Note: the default flow control setting of Hyperterminal is ¡°hardware¡±, you need to change to ¡°none¡± for proper operation). After opening terminal program for serial console port, you must press the CONFIG button and hold for two seconds until the blue LED will light. Following is an example of the message that will appear, if the product is an USB2-4COM PRO.